Energy Analysis and Environmental Impacts Division
Implications of nicotine sorption on indoor surfaces on its use as a marker for environmental tobacco smoke." Proceedings of the A&WMA/EPA Symposium: Engineering Solutions to IAQ Problems, Research Triangle Park, NC 1997.
, and . "Sensor Networks for Detecting Toxic Releases in Buildings." 11th International Conference on Air Distribution in Rooms, May 24-27, 2009. Busan, Korea, 2009.
, , , and . "Rapidly Locating Sources And Predicting Contaminant Dispersion In Buildings." Proceedings of the Indoor Air 2002 Conference, Monterey, CA 2002: 211–216.
, , , and . "Indoor Sampler Siting." 11th International Conference on Air Distribution in Rooms 2009.
, and . "Modeling shelter-in-place including sorption on indoor surfaces." 84th American Meteorological Society Annual Meeting, January 11-14, 2004 2004.
, , , , , and . "Measuring dispersion of gases in a large scale indoor environment using an open path tunable diode laser." Proceedings of the Indoor Air ’99, Edinburgh, Scotland 1999: 449–450.
, , , , , and . "Comparison between experiments and CFD predictions of mixed convection flows in an atrium." Proceedings of the 10th International Conference on Indoor Air Quality and Climate 2005: 2849–2853.
, , , , , , and . "Investigation of Room Ventilation for Improved Operation of a Downdraft Table." Proceedings of The 10th International Conference on Indoor Air Quality and Climate - Indoor Air 2005 2005: 2575–2579.
, , , and . "Mixing of a point-source indoor pollution: Numerical predictions and comparison with experiments." Proceedings of the Indoor Air 2002 Conference, Monterey, CA 2002: 223–228.
, and . "Assessing multizone airflow simulation software." Proceedings of the Indoor Air 2002, Monterey, CA 2002: 267–271.
. "Improving Speed and Robustness of the COMIS Solver." Proceedings of the RoomVent 2000,7th International Conference on Air Distribution in Rooms, Reading, UK 2000: 241–246.
, and . "Characterizing indoor airflow and pollutant transport using simulation modeling for prototypical buildings. 1. Office buildings." Proceedings of the Indoor Air ’99, Edinburgh, Scotland 1999: 719–724.
, , and . "Modeling Transient Contaminant Transport in HVAC Systems and Buildings." Indoor Air 2002, June 30 - July 5, 2002. Monterey, California, 2002. 217–222.
, , , , and . "Total Exposure — Indoor and Outdoor Air in Residential and Occupational Settings." Proceedings of the 2nd Colloquium on Particulate Air Pollution and Human Health, May 1-3, 1996. Park City, UT: Department of Community and Environmental Medicine, University of California, Irvine, CA, 1996.
, and . "Concentrations and Sources of Formaldehyde and Volatile Organic Compounds in Four New Manufactured Houses." Proceedings of the Indoor Air ’99, Edinburgh, Scotland 1999: 119–124.
, , and . " , , , , , , , , and . "
Benefits and technological challenges in the implementation of TiO2-based ultraviolet photocatalytic oxidation (UVPCO) air cleaners." Indoor Air 2008. Copenhagen, Denmark: Indoor Air, Paper ID: 297, 2008. 17–22.
, , , and . "Determining transfer factors for outdoor aerosol plumes entering buildings." Proceedings of the Indoor Air ’99, Edinburgh, Scotland 1999: 331–334.
, , and . "The Transformation Of Outdoor Ammonium Nitrate Aerosols In The Indoor Environment." Proceedings of the Indoor Air 2002 Conference, Monterey, CA. Vol. 5. Indoor Air 2002, Santa Cruz, CA, 2002. 74–79.
, , , , , , and . "Modeling Particle Deposition In Ventilation Ducts." Indoor Air 2002 Conference. Monterey, CA: International Academy of Indoor Air Sciences, 2002. 515–520.
, and . "