National Level Co-Control Study of the Targets for Energy Intensity and Sulfur Dioxide in China

Date Published
10/2011
Publication Type
Report
Authors
Tertiary Author
LBL Report Number
LBNL-5253E
Abstract

Since 2006, China has set goals of reducing energy intensity, emissions, and pollutants in multiple guidelines and in the Five Year Plans. Various strategies and measures have then been taken to improve the energy efficiency in all sectors and to reduce pollutants. Since controlling energy, CO2 emissions, and pollutants falls under the jurisdiction of different government agencies in China, many strategies are being implemented to fulfill only one of these objectives.Co-controls or integrated measures could simultaneously reduce greenhouse gas (GHG)emissions and criteria air pollutant emissions. The targets could be met in a more cost effective manner if the integrated measures can be identified and prioritized. This report provides analysis and insights regarding how these targets could be met via co-control measures focusing on both CO2 and SO2 emissions in the cement, iron & steel, and power sectors to 2030 in China. An integrated national energy and emission model was developed in order to establish a baseline scenario that was used to assess the impact of actions already taken by the Chinese government as well as planned and expected actions. In addition, CO2 mitigation scenarios and SO2 control scenarios were also established to evaluate the impact of each of the measures and the combined effects.

The research finds:

In the power sector, although the end of pipe SO2 control technology such as flue gas desulfurization (FGD) has the largest reduction potential for SO2 emissions, other CO2 control options have important co-benefits in reducing SO2 emissions of 52.6 Mt of SO2 accumulatively. Coal efficiency improvements along with hydropower, renewable and nuclear capacity expansion will result in more than half of the SO2 emission reductions as the SO2 control technology through 2016. In comparison, the reduction from carbon capture and sequestration (CCS) is much less and has negative SO2 reductions potential. The expanded biomass generation scenario does not have significant potential for reducing SO2 emissions, because of its limited availability. For the cement sector, the optimal co-control strategy includes accelerated adoption of energy efficiency measures, decreased use of clinker in cement production, increased use of alternative fuels, and fuel-switching to biomass. If desired, additional SO2 mitigation could be realized by more fully adopting SO2 abatement mitigation technology measures. The optimal co-control scenario results in annual SO2 emissions reductions in 2030 of 0.16 Mt SO2 and annual CO2 emissions reductions of 76 Mt CO2.

For the iron and steel sector, the optimal co-control strategy includes accelerated adoption of energy efficiency measures, increased share of electric arc furnace steel production, and reduced use of coal and increased use of natural gas in steel production. The strategy also assumes full implementation of sinter waste gas recycling and wet desulfurization. This strategy results in annual SO2 emissions reductions in 2030 of 1.3 Mt SO2 and annual CO2 emissions reductions of 173 Mt CO2.

Year of Publication
2011
Institution
Lawrence Berkerley National Laboratory
ISBN Number
LBNL-5253E
Keywords
Organizations
Research Areas
File(s)
Download citation