Energy Storage and Distributed Resources Division
II. A combined model for determining capacity usage and battery size for hybrid and plug-in hybrid electric vehicles." Journal of Power Sources 183.2 (2008) 771–782.
, , , and . "Modeling of a growing oxide film: The iron/iron oxide system." Journal of the Electrochemical Society 142.5 (1995) 1423–1430.
, and . "Differential voltage analyses of high-power, lithium-ion cells: 1. Technique and application." Journal of power sources 139.1 (2005) 295–303.
, , , , , , and . "Effect of cathode composition on capacity fade, impedance rise and power fade in high-power, lithium-ion cells." Journal of power sources 124.2 (2003) 538–550.
, , , , , , , , and . "Mechanisms of impedance rise in high-power, lithium-ion cells." Journal of power sources 111.1 (2002) 152–159.
, , , , , , , , , and . "Mesoscale phase distribution in single particles of LiFePO4 following lithium deintercalation." Chemistry of Materials 25.9 (2013) 1664–1672.
, , , , , , , , , , and . "On the High Rate Capability of LiFePO4." ECS Transactions 33.29 (2011) 17–29.
, and . "Investigations on Silicon Composite Electrodes for Lithium-Ion Batteries." ECS Transactions 33.29 (2011) 75–90.
, and . "Commercial Building Loads Providing Ancillary Services in PJM." ACEEE Summer Study on Energy Efficiency in Buildings 2014. Asilomar Conference Center, Pacific Grove, CA, 2014.
, , , , and . "Unexplained transport resistances for low-loaded fuel-cell catalyst layers." J. Mater. Chem. A 2.41 (2014) 17207–17211.
, and . "A Critical Review of Modeling Transport Phenomena in Polymer-Electrolyte Fuel Cells." Journal of the Electrochemical Society 161.12 (2014) F1254 - F1299.
, , , , , , , , , , , , , , and . "Inorganic binder-containing composite cathode contact materials for solid oxide fuel cells." Journal of Power Sources 224 (2013) 174–179.
, , and . "Mechanical and electrochemical performance of composite cathode contact materials for solid oxide fuel cells." Journal of Power Sources 239 (2013) 315–320.
, , , , and . "Slip-cast and hot-solution infiltrated porous yttria stabilized zirconia (YSZ) supported tubular fuel cells." Journal of Power Sources 266 (2014) 121–131.
, , , , , , , and . "An environmentally benign LIB fabrication process using a low cost, water soluble and efficient binder." Journal of Materials Chemistry A 1.38 (2013) 11543–11547.
, , , , , and . "Stabilizing the surface of lithium metal." MRS Bulletin 39.05 (2014) 429–435.
, , and . "A novel all-solid electrolyte based on a co-polymer of poly-(methoxy/hexadecal-poly(ethylene glycol) methacrylate) for lithium-ion cell." Journal of Materials Chemistry 22.41 (2012) 22265–22271.
, , , , , and . "Nonflammable perfluoropolyether-based electrolytes for lithium batteries." Proceedings of the National Academy of Sciences 111.9 (2014) 3327–3331.
, , , , , , , and . "Application of Stabilized Lithium Metal Powder (SLMP®) in graphite anode – A high efficient prelithiation method for lithium-ion batteries." Journal of Power Sources 260 (2014) 57–61.
, , , , , , and . "Measurements and Simulations of Electrochemical Impedance Spectroscopy of a Three-Electrode Coin Cell Design for Li-Ion Cell Testing." Journal of the Electrochemical Society 161.9 (2014) A1253 - A1260.
, , , and . "