Liping Wang
Publications
Viewing 25 of 29 publications
2014
, , , , , , and . "
2012
Uncertainties in energy consumption introduced by building operations and weather for a medium-size office building." Energy and Buildings 53 (2012) 152–158.
, , and . "Uncertainties in energy consumption introduced by building operations and weather for a medium-size office building." Energy and Buildings 53 (2012) 152–158.
, , and . "The Energy Saving Potential of Membrane-Based Enthalpy Recovery in Vav Systems for Commercial Office Buildings." SimBuild 2012 IBPSA Conference. 2012.
, , and . "An Improved Simple Chilled Water Cooling Coil Model." SimBuild 2012 IBPSA Conference. 2012.
, , and . " , , , , , , , , and .
The Energy Saving Potential of Membrane-Based Enthalpy Recovery in VAV System for Commercial Office Buildings." SimBuild 2012. Madison, Wisconsin, 2012.
, , and . "2013
Building Performance Simulation. Ed. , , , , , and . 2013.
, , , , and . Modeling and Simulation of HVAC Faulty Operations and Performance Degradation due to Maintenance Issues." ASim 2012 - 1st Asia conference of International Building Performance Simulation Association. 2013.
, and . "2011
, , , and . "
Modeling and simulation of HVAC faults in EnergyPlus." Building Simulation 2011. Australia, 2011.
, , , , and . "2004
A numerical study of vertical solar chimney for Enhancing stack ventilation in buildings." The 21st International Conference on Passive and Low Energy Architecture, The Netherlands. 2004.
, and . "Heat transfer and natural ventilation from single-sided heated solar chimney for buildings." Journal of Asian Architecture and Building Engineering 3.2 (2004).
, , , and . "2006
Natural ventilation simulation by using coupling building simulation and CFD simulation program for accurate prediction of indoor thermal environment." the 23st International conference on Passive and Low energy architecture , Geneva. 2006.
, and . "A numerical study of Trombe wall for enhancing stack ventilation in buildings." The 23rd International Conference on Passive and Low Energy Architecture, Geneva. 2006.
, and . "Coupling between the CFD simulation and building simulation for better prediction of natural ventilation." the 2nd International conference on sustainable architecture and urban design in tropical regions, Jogjakarta. 2006.
, and . "A coupling method to increase the accuracy of natural ventilation prediction in thermal simulation program." the 2nd International conference on sustainable architecture and urban design in tropical regions, Jogjakarta. 2006.
, and . "The impacts of facade designs: orientations, window to wall ratios and shading devices on indoor environment for naturally ventilated residential buildings in Singapore." the 23st International conference on Passive and Low energy architecture, Geneva. 2006.
, and . "2005
The impacts of facade and ventilation strategies on indoor thermal environment for a naturally ventilated residential building in Singapore." the 10th International conference on Indoor Air Quality and Climate, Beijing. 2005.
, and . "Thermal analysis of climate environments based on weather data in Singapore for naturally ventilated buildings." the 10th International conference on Indoor Air Quality and Climate,Beijing. 2005.
, and . "2007
Discussion of strategies for UK zero energy building design." 2nd PALENC conference and 28th AIVC conference, 27-29 September. 2007.
, and . "A convenient coupled simulation method for thermal environment prediction in naturally ventilated buildings." 2nd PALENC conference and 28th AIVC conference, 27-29 September. 2007.
, and . "Investigation of the possibility of applying natural ventilation for thermal comfort in residential buildings in Singapore." Architectural Science Review 50 (2007) 190–199.
, and . "2009
Coupled simulations for naturally ventilated rooms between building simulation (BS) and computational fluid dynamics (CFD) for better prediction of indoor thermal environment." Building and Environment 44.1 (2009) 95–112.
, and . "2008
Coupled simulations for naturally ventilated residential buildings." Automation in Construction 17.4 (2008) 386–398.
, and . "