%0 Journal Article %A Zhikuan Zhu %A Boxun Hu %A Michael C Tucker %B International Journal of Hydrogen Energy %D 2024 %G eng %P 316 - 321 %R 10.1016/j.ijhydene.2024.01.345 %T Dynamic operation of metal-supported solid oxide electrolysis cells %U https://linkinghub.elsevier.com/retrieve/pii/S0360319924003859 %V 59 %8 02/2024 %! International Journal of Hydrogen Energy %X

Symmetric-structure metal-supported solid oxide fuel cells and electrolysis cells (MS-SOFCs, MS-SOECs) offer several advantages over conventional solid oxide cells, including the use of inexpensive materials, high mechanical strength, and rapid ramp-up ability. Aggressive operation of MS-SOCs in fuel cell mode is well-established, including extremely fast start-up, redox tolerance, and imbalanced pressure. Here, we extend dynamic operation to MS-SOCs in SOEC mode with high steam content for both small button cells and a large rectangular cell, including: steam cycling, thermal cycling, redox cycling and power cycling. Steam cycling entailed switching between 3:97 and 50:50 steam:hydrogen ratio. For thermal cycling, the temperature was rapidly varied between 150 °C and 700 °C for 50 cycles. Redox cycling involved switching the steam side gas between 50 % humidified H2 and 50 % humidified N2 for 5 cycles. Power cycling was performed by operating the cell under variable current density, resulting in cell voltage between 1.3 V and 2.8 V. Degradation rates for each testing strategy were compared to a baseline cell, and found to be similar. The excellent tolerance to dynamic operation increases confidence that MS-SOECs will be compatible with dynamic or intermittent renewable resources.