TY - JOUR
KW - Lithium
KW - Lithium compounds
KW - Manganese compounds
KW - Polymers
KW - Secondary cells
AU - Guoying Chen
AU - Thomas J Richardson
AB - <p>Overcharge protection for 4 V Li<sub>1.05</sub>Mn<sub>1.95</sub>O<sub>4</sub>/lithium cells at charging rates in excess of 1 mA/cm<sup>2</sup> (3C) and at temperatures of as low as −20°C was achieved using a bilayer separator coated with two electroactive polymers. High rate and low temperature overcharge protection and discharge performance were improved by employing a design in which the polymer-coated portion of the separator is in parallel with the cell rather than between the electrodes. The effects of different membrane supports for the electroactive polymers were also examined.</p>
BT - Journal of Electrochemical Society
DO - 10.1149/1.3392370
IS - 6
LA - eng
N2 - <p>Overcharge protection for 4 V Li<sub>1.05</sub>Mn<sub>1.95</sub>O<sub>4</sub>/lithium cells at charging rates in excess of 1 mA/cm<sup>2</sup> (3C) and at temperatures of as low as −20°C was achieved using a bilayer separator coated with two electroactive polymers. High rate and low temperature overcharge protection and discharge performance were improved by employing a design in which the polymer-coated portion of the separator is in parallel with the cell rather than between the electrodes. The effects of different membrane supports for the electroactive polymers were also examined.</p>
PY - 2010
SP - A735
EP - A740
T2 - Journal of Electrochemical Society
TI - Overcharge Protection for 4 V Lithium Batteries at High Rates and Low Temperatures
VL - 157
ER -