@article{25354,
  keywords = {Model, Transformation, Temperature, USA, Surface, Pulse, Power, Films, Ablation, Laser, Laser ablation, Laser ablation, Time-resolved, Intensity, Crystal, State, Time, Ca, E, Liquid, Mass, Sample, Samples, Properties, Property, Single, C, Crater, Metals, Volume, Droplet, Droplets, Nanosecond, Aluminum, Inductively-coupled plasma, Size, Metal, Nanosecond laser, Depth, Microprobe, White-light, Silicon, Light, Gas-dynamics, Layer, Threshold, Plume, Irradiance, Pulse laser, Pulse laser ablation, Critical temperature, Physics, Single-crystal, Dielectric, Heat transfer, Thickness, Solidification, Transparency, Crater morphology, Critical state, Critical-state, Deep, Ejection, Morphology},
  author = {Jong-Hyun Yoo and Sungho Jeong and Ralph Greif and Richard E Russo},
  title = {Explosive change in crater properties during high power nanosecond laser ablation of silicon},
  abstract = {<p>Mass removed from single crystal silicon samples by high irradiance (1×10<sup>9</sup> to 1×10<sup>11</sup> W/cm<sup>2</sup>) single pulse laser ablation was studied by measuring the resulting crater morphology with a white light interferometric microscope. The craters show a strong nonlinear change in both the volume and depth when the laser irradiance is less than or greater than ≈2.2×10<sup>10</sup> W/cm<sup>2</sup>. Time-resolved shadowgraph images of the ablated silicon plume were obtained over this irradiance range. The images show that the increase in crater volume and depth at the threshold of 2.2×10<sup>10</sup> W/cm<sup>2</sup> is accompanied by large size droplets leaving the silicon surface, with a time delay ∼300 ns. A numerical model was used to estimate the thickness of the layer heated to approximately the critical temperature. The model includes transformation of liquid metal into liquid dielectric near the critical state (i.e., induced transparency). In this case, the estimated thickness of the superheated layer at a delay time of 200–300 ns shows a close agreement with measured crater depths. Induced transparency is demonstrated to play an important role in the formation of a deep superheated liquid layer, with subsequent explosive boiling responsible for large-particulate ejection.</p>},
  year = {2000},
  journal = {Journal of Applied Physics},
  volume = {88},
  pages = {1638-1649},
  month = {08/2000},
  doi = {10.1063/1.373865 },
  note = {<p>LBNL-45733 NOT IN FILE</p>},
  language = {eng},
}