@article{22135,
  keywords = {Indoor environment department, Exposure, Ozone, Airflow and pollutant transport group, Indoor airflow and pollutant transport, Infiltration, Particles, Penetration factor, Reaction probability},
  author = {De-Ling Liu and William W Nazaroff},
  title = {Modeling pollutant penetration across building envelopes},
  abstract = {<p>As air infiltrates through unintentional openings in building envelopes, pollutants may interact with adjacent surfaces. Such interactions can alter human exposure to air pollutants of outdoor origin. We present modeling explorations of the proportion of particles and reactive gases (e.g., ozone) that penetrate building envelopes as air enters through cracks and wall cavities. Calculations were performed for idealized rectangular cracks, assuming regular geometry, smooth inner crack surface and steady airflow. Particles of 0.1–1.0&nbsp;μm diameter are predicted to have the highest penetration efficiency, nearly unity for crack heights of 0.25&nbsp;mm or larger, assuming a pressure difference of 4&nbsp;Pa or greater and a flow path length of 3&nbsp;cm or less. Supermicron and ultrafine particles are significantly removed by means of gravitational settling and Brownian diffusion, respectively. In addition to crack geometry, ozone penetration depends on its reactivity with crack surfaces, as parameterized by the reaction probability. For reaction probabilities less than ∼10<sup>−5</sup>, penetration is complete for cracks heights greater than ∼1&nbsp;mm. However, penetration through mm scale cracks is small if the reaction probability is ∼10<sup>−4</sup> or greater. For wall cavities, fiberglass insulation is an efficient particle filter, but particles would penetrate efficiently through uninsulated wall cavities or through insulated cavities with significant airflow bypass. The ozone reaction probability on fiberglass fibers was measured to be 10<sup>−7</sup> for fibers previously exposed to high ozone levels and 6×10<sup>−6</sup> for unexposed fibers. Over this range, ozone penetration through fiberglass insulation would vary from &gt;90% to ∼10–40%. Thus, under many conditions penetration is high; however, there are realistic circumstances in which building envelopes can provide substantial pollutant removal. Not enough is yet known about the detailed nature of pollutant penetration leakage paths to reliably predict infiltration into real buildings.</p>},
  year = {2001},
  journal = {Atmospheric Environment},
  volume = {35},
  number = {26},
  pages = {4451-4462},
  month = {09/2001},
  url = {http://dx.doi.org/10.1016/S1352-2310(01)00218-7},
  language = {eng},
}